fbpx

A BREAK FROM THE WEATHER FOR A FAMOUS FEATHER

A BREAK FROM THE WEATHER FOR A FAMOUS FEATHER

For 121½ years, a copper weathervane shaped like a quill has perched atop the Clock Tower at University of Wisconsin-Stout — 135 feet above campus and downtown Menomonie.

The quill finally is getting a rest from the elements.

FLOATS LIKE A (LEAD) FEATHER

On Aug. 27, two workers with Building Restoration Corp. of Roseville, Minn., hung in a basket from a lift and slowly swung around the quill. They removed the molded flame — or torch — at the top of a lightning rod, then the quill just below and its support hardware.

After about 4½ hours and some mechanical challenges with rusted parts and a 75-pound lead-filled pipe, all of it was gently brought to the ground next to Bowman Hall, where workers hauled it away.

But not for long. The quill may return this fall, although it hasn’t been determined yet if it will be restored or replaced.

The work is part of an $8.95 million restoration project on Bowman Hall, the northeast corner of which is the Clock Tower. Most of the work is being done on the building’s exterior, including replacing about 30,000 worn bricks and installing new windows and doors.

The work began in spring 2018 and has proceeded to the final stage, the upper part of the Clock Tower. Along with repairing and restoring the quill, the top of the tower will get a new, shiny copper roof this fall.

“Truthfully, I don’t think the quill would have lasted a whole lot longer, maybe two or three years,” said Joe Vaughan, BRC project foreman, pointing to rusting pipes that were part of the quill’s support system.

He was in the top of the Clock Tower, next to the bells, during the quill removal. The bells have been silenced, except for special occasions, during this phase of the project.

The quill is a “feather” about nine feet long and two feet high and a “pen” about 4½ feet long. The feather body consists of two scribed or ribbed copper plates welded together at the edges, but much of the welding had failed.

The molded flame, also about two feet high, along with an oval decorative piece at the base of the rod and other parts also will be restored or replaced, said Mike Bowman, a project manager for Facilities Management at UW-Stout.

The experts, including preservation architects and restoration companies, are discussing the best options. The original construction documents called for restoration, including items such as straightening the ends of the feather, replacing clamps, lubricating parts and filling in holes in the copper.

“Once the system was reviewed up close and on the ground, a decision was made to investigate the option of replacing it completely or whether it still can be restored,” Bowman said.

“It’s in pretty rough shape, and we want it to last another 100-plus years, so doing it the right way is important. We should know in the next couple of weeks what direction the experts suggest taking it,” Bowman said.

New support hardware for the quill will be made of stainless steel, which hadn’t been invented in 1897.

Leave a Reply

Your email address will not be published. Required fields are marked *